 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SZP-5026Z 4.9GHz to 5.9GHz 2W InGaP Amplifier Preliminary SZP-5026Z 4.9GHz to 5.9GHz 2W InGaP AMPLIFIER RFMD Green, RoHS Compliant, Pb-Free Package: Proprietary SOF-26 www..com Product Description RFMD's SZP-5026Z is a high-linearity, single-stage, class AB Heterojunction Bipolar Transistor (HBT) power amplifier. It is designed with InGaP-on-GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability. This product is specifically designed for use as a driver or final stage power amp for 802.16 equipment in the 4.9GHz to 5.9GHz bands. It is pre-matched on both ports to simplify external application circuit design. It features an input power detector, on/off power control, ESD protection, excellent overall robustness, and a hand reworkable and thermally enhanced surface-mount SOF-26 package. Optimum Technology Matching(R) Applied GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT RF MEMS Vbias RFIN SZP-5026 RFOUT Vcc Features P1dB =33dBm @ 5V 802.11a 54Mb/s Class AB Performance POUT =25dBm @ 2.5% EVM, 5.9GHz, 5V, 680mA On-Chip Input Power Detector Internally Prematched Input and Output Proprietary Low Thermal Resistance Package Power Up/Down Control<1s Applications 802.16 WiMAX Driver or Output Stage 5GHz 802.11 WLAN and ISM Applications Active Bias Power Up/Down Control Power Detector Parameter Frequency of Operation Output Power at 1dB Compression Small Signal Gain EVM at 25dBm Output Power Third Order Suppression Noise Figure Worst Case Input Return Loss Worst Case Output Return Loss Output Voltage Range Quiescent Current Power Up Control Current VCC Leakage Current Min. 4900 Specification Typ. 32.5 8.8 2.5 -45.0 5.4 19.0 13.0 Max. 5900 Unit MHz dBm dBm % dBc dB dB dB V mA mA Condition 5.9GHz 5.9GHz 5.9GHz, 802.11a 54Mb/s 5.9GHz, POUT =23dBm per tone 5.9GHz 5.7GHz to 5.9GHz 5.7GHz to 5.9GHz POUT =10dBm to 33dBm VCC =5V VPC =5V VCC =5V, VPC =0V Junction-to-Lead 0.8 602 2.7 2.0 100 A C/W Thermal Resistance 14.0 Test Conditions: Z0 =50, VCC =5V, IQ =602mA, TBP =30C RF MICRO DEVICES(R), RFMD(R), Optimum Technology Matching(R), Enabling Wireless ConnectivityTM, PowerStar(R), POLARISTM TOTAL RADIOTM and UltimateBlueTM are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. (c)2006, RF Micro Devices, Inc. EDS-105366 Rev C 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 14 SZP-5026Z Absolute Maximum Ratings Parameter VC1 Collector Bias Current (IVC1) Device Voltage (V www..comCC)* Power Dissipation (PDISS) Operating Lead Temperature (TL) **Max RF output Power for 50 continuous long term operation Max Modulated (***OFDM) RF Input Power for 50 output load Max Modulated (***OFDM) RF Input Power for 10:1 VSWR output load Storage Temperature Range Operating Junction Temperature (TJ) ESD Human Body Model Moisture Sensitivity Level Preliminary Rating 1500 6.0 6 -40 to +85 30 28 21 -40 to +150 +150 1000 MSL 1 Unit mA V W C dBm dBm dBm C C V Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. *No RF Drive **With specified application circuit ***Modulation schemes include 802.11a/g, 802.16 Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: ID VD <(TJ -TL)/RTH, j-l Typical 5V Performance with Appropriate Application Circuit (VCC =5V, ICQ =602mA, 802.11a 54Mb/s) Parameter Units dB dBm dBm mA dB dB 5.15GHz 5.35GHz 5.7GHz 5.9GHz 8.8 32.7 25.3 632 10 15 9.0 32.2 25.1 631 13 13 9.4 33.2 25.3 670 19 15 8.8 32.5 25.0 670 19 13 Gain @ POUT =26dBm P1dB POUT @ 2.5% EVM Current @ POUT 2.5% EVM Input Return Loss Output Return Loss Simplified Device Schematic GND VBIAS 1 Bias 6 5 NC RFIN 2 RFOUT/VCC VPC 3 4 VDET GND 2 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105366 Rev C Preliminary SZP-5026Z 5.15GHz to 5.35GHz Application Circuit Data (VCC =VPC =5.0V, IQ =563mA) Typical EVM versus POUT F=5.15GHz Typical EVM versus POUT F=5.35GHz 802.11g, OFDM 54Mb/s, 64QAM 802.11g, OFDM 54Mb/s, 64QAM 6.0 www..com 5.0 -40C +25C +85C 6.0 5.0 -40C +25C +85C 4.0 4.0 EVM (%) 3.0 EVM (%) 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 3.0 2.0 2.0 1.0 1.0 0.0 12.0 0.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 POUT(dBm) POUT(dBm) -40.0 IM3 versus POUT (2 Tone Avg), T=+25C Tone Spacing = 1MHz 5.15GHz 5.35GHz Typical Forward Gain versus POUT, T=+25C 12.0 11.5 11.0 10.5 10.0 5.7GHz 5.9GHz -45.0 IM3 (dBc) Gain (dB) -50.0 9.5 9.0 8.5 8.0 -55.0 -60.0 7.5 7.0 6.5 -65.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 6.0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 POUT(dBm) POUT(dBm) Typical Forward Gain versus POUT, F=5.15GHz 15.0 14.0 13.0 12.0 Typical Forward Gain versus POUT, F=5.35GHz 15.0 14.0 13.0 12.0 -40C +25C +85C -40C +25C +85C Gain (dB) 10.0 9.0 8.0 7.0 6.0 5.0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Gain (dB) 11.0 11.0 10.0 9.0 8.0 7.0 6.0 5.0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 POUT(dBm) POUT(dBm) EDS-105366 Rev C 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 3 of 14 SZP-5026Z Narrowband S11 - Input Return Loss 0.0 Preliminary 5.15GHz to 5.35GHz Application Circuit Data (VCC =VPC =5.0V, IQ =563mA) Narrowband S21 - Forward Gain 12.0 11.0 10.0 9.0 www..com -5.0 -40C 25C 85C -10.0 S11 (dB) S21 (dB) 8.0 7.0 6.0 5.0 4.0 3.0 -15.0 -20.0 -40C 25C 85C -25.0 -30.0 5.15 5.20 5.25 5.30 5.35 2.0 5.15 5.20 5.25 5.30 5.35 Frequency (GHz) Frequency (GHz) Narrowband S12 - Reverse Isolation -10.0 Narrowband S22 - Output Return Loss 0.0 -15.0 -40C 25C 85C -5.0 -40C 25C 85C -20.0 -10.0 -25.0 S22 (dB) 5.20 5.25 5.30 5.35 S12(dB) -15.0 -30.0 -20.0 -35.0 -25.0 -40.0 5.15 -30.0 5.15 5.20 5.25 5.30 5.35 Frequency (GHz) Frequency (GHz) 4 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105366 Rev C Preliminary 5.15GHz to 5.35GHz Application Circuit Data (VCC =VPC =5.0V, IQ =563mA) Broadband S11 - Input Return Loss 0.0 20.0 10.0 0.0 SZP-5026Z Broadband S21 - Forward Gain www..com -5.0 -40C 25C 85C -10.0 S11 (dB) S21 (dB) 5.0 7.5 10.0 12.5 15.0 -15.0 -40C 25C 85C -10.0 -20.0 -30.0 -40.0 -50.0 -20.0 -25.0 -30.0 0.0 2.5 0.0 2.5 5.0 7.5 10.0 12.5 15.0 Frequency (GHz) Frequency (GHz) Broadband S12 - Reverse Isolation 0.0 -5.0 -10.0 -15.0 Broadband S22 - Output Return Loss 0.0 -40C 25C 85C -5.0 -10.0 S12 (dB) -25.0 -30.0 -35.0 -40.0 -45.0 -50.0 0.0 2.5 5.0 7.5 10.0 12.5 15.0 S22 (dB) -20.0 -15.0 -20.0 -40C 25C 85C -25.0 -30.0 0.0 2.5 5.0 7.5 10.0 12.5 15.0 Frequency (GHz) Frequency (GHz) EDS-105366 Rev C 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 5 of 14 SZP-5026Z DC Supply Current versus POUT, T=+25C 1.2 Preliminary 5.15GHz to 5.35GHz Application Circuit Data (VCC =VPC =5.0V, IQ =563mA) Noise Figure F=5.15GHZ to 5.35GHz 7.0 www..com 1.1 1.0 5.15GHz 5.35GHz 6.5 25C 85C 6.0 NF (dB) 22.0 24.0 26.0 28.0 30.0 32.0 34.0 IDC (A) 0.9 0.8 0.7 0.6 0.5 20.0 5.5 5.0 4.5 4.0 5150 5200 5250 5300 5350 POUT (dBm) Frequency (MHz) RF Power (VDET) versus POUT F=5.15GHz 2.4 2.2 2.0 1.8 RF Power (VDET) versus POUT F=5.35GHz 2.4 2.2 2.0 1.8 -40C +25C +85C -40C +25C +85C VDET (V) VDET (V) 1.6 1.4 1.2 1.0 0.8 20.0 22.0 24.0 26.0 28.0 30.0 32.0 34.0 1.6 1.4 1.2 1.0 0.8 20.0 22.0 24.0 26.0 28.0 30.0 32.0 34.0 POUT (dBm) POUT (dBm) 6 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105366 Rev C Preliminary 5.7GHz to 5.9GHz Application Circuit Data (VCC =VPC =5.0V, IQ =602mA) 6.0 SZP-5026Z Typical EVM versus POUT F=5.9GHz 802.11g, OFDM 54Mb/s, 64QAM -40C +25C +85C Typical EVM versus POUT F=5.7GHz 802.11g, OFDM 54Mb/s, 64QAM -40C +25C +85C 6.0 www..com 5.0 5.0 4.0 4.0 EVM (%) 3.0 EVM (%) 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 3.0 2.0 2.0 1.0 1.0 0.0 12.0 0.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 POUT (dBm) POUT (dBm) -30.0 IM3 versus POUT (2 Tone Avg), T=+25C Tone Spacing = 1MHz 5.7GHz 5.9GHz Typical Forward Gain versus POUT, T=+25C 12.0 11.5 11.0 10.5 5.7GHz 5.9GHz -35.0 -40.0 10.0 IM3 (dBc) Gain(dB) 9.5 9.0 8.5 8.0 7.5 -45.0 -50.0 -55.0 7.0 6.5 -60.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 6.0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 POUT (dBm) POUT(dBm) Typical Forward Gain versus POUT, F=5.7GHz 15.0 14.0 13.0 12.0 Typical Forward Gain versus POUT, F=5.9GHz 15.0 14.0 13.0 12.0 -40C +25C +85C -40C +25C +85C Gain (dB) 10.0 9.0 8.0 7.0 6.0 5.0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Gain (dB) 11.0 11.0 10.0 9.0 8.0 7.0 6.0 5.0 20 21 22 23 24 25 26 27 28 29 30 31 32 33 POUT (dBm) POUT (dBm) EDS-105366 Rev C 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 7 of 14 SZP-5026Z Narrowband S11 - Input Return Loss 0.0 Preliminary 5.7GHz to 5.9GHz Application Circuit Data (VCC =VPC =5.0V, IQ =602mA) Narrowband S21 - Forward Gain 12.0 www..com -5.0 -40C 25C 85C 11.0 10.0 9.0 -10.0 S11 (dB) S21 (dB) 8.0 7.0 6.0 5.0 4.0 3.0 -15.0 -20.0 -40C 25C 85C -25.0 -30.0 5.70 5.75 5.80 5.85 5.90 2.0 5.70 5.75 5.80 5.85 5.90 Frequency (GHz) Frequency (GHz) Narrowband S12 - Reverse Isolation 0.0 -5.0 -10.0 -15.0 Narrowband S22 - Output Return Loss 0.0 -40C 25C 85C -5.0 -40C 25C 85C -10.0 S12 (dB) -25.0 -30.0 -35.0 -40.0 -45.0 -50.0 5.70 5.75 5.80 5.85 5.90 S22 (dB) -20.0 -15.0 -20.0 -25.0 -30.0 5.70 5.75 5.80 5.85 5.90 Frequency (GHz) Frequency (GHz) 8 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105366 Rev C Preliminary 5.7GHz to 5.9GHz Application Circuit Data (VCC =VPC =5.0V, IQ =602mA) Broadband S11 - Input Return Loss 0.0 20.0 10.0 SZP-5026Z Broadband S21 - Forward Gain -40C 25C 85C www..com -5.0 -10.0 S11 (dB) S21 (dB) 5.0 7.5 10.0 12.5 15.0 -40C 25C 85C 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 -15.0 -20.0 -25.0 -30.0 0.0 2.5 0.0 2.5 5.0 7.5 10.0 12.5 15.0 Frequency (GHz) Frequency (GHz) Broadband S12 - Reverse Isolation 0.0 -5.0 -10.0 -15.0 Broadband S22 - Output Return Loss 0.0 -40C 25C 85C -5.0 -10.0 S12 (dB) S22 (dB) -20.0 -25.0 -30.0 -35.0 -40.0 -45.0 -50.0 0.0 2.5 5.0 7.5 10.0 12.5 15.0 -15.0 -20.0 -25.0 -40C 25C 85C -30.0 0.0 2.5 5.0 7.5 10.0 12.5 15.0 Frequency (GHz) Frequency (GHz) EDS-105366 Rev C 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 9 of 14 SZP-5026Z DC Supply Current versus POUT, F=5.9GHz 1.5 Preliminary 5.7GHz to 5.9GHz Application Circuit Data (VCC =VPC =5.0V, IQ =602mA) Noise Figure F=5.7GHz to 5.9GHz 7.0 www..com 1.4 1.3 1.2 -40C +25C +85C +25C 6.5 +85C 6.0 NF(dB) 1.1 IDC (A) 1.0 0.9 0.8 0.7 0.6 0.5 20.0 22.0 24.0 26.0 28.0 30.0 32.0 34.0 5.5 5.0 4.5 4.0 5700 5750 5800 5850 5900 POUT (dBm) Frequency (MHz) RF Power (VDET) versus POUT F=5.7GHz 2.8 2.6 2.4 2.2 RF Power (VDET) versus POUT F=5.9GHz 2.8 2.6 2.4 2.2 -40C +25C +85C -40C +25C +85C VDET (V) 1.8 1.6 1.4 1.2 1.0 0.8 20.0 22.0 24.0 26.0 28.0 30.0 32.0 34.0 VDET (V) 2.0 2.0 1.8 1.6 1.4 1.2 1.0 0.8 20.0 22.0 24.0 26.0 28.0 30.0 32.0 34.0 POUT (dBm) 10 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105366 Rev C Preliminary Evaluation Board Schematic SZP-5026Z V+ 5.15GHz to 5.35GHz Evaluation Board Schematic for V+= VCC =VPC =5.0V, IQ =563mA www..com R2 0 * R4 SIMULATES EXTERNAL CIRCUIT LOADING TO GROUND. RECOMMENDED LOAD RANGE IS 10K-100K OHMS. MAY BE REMOVED IF VDET IS NOT USED ** TRANSMISSION LINE LENGTHS ARE MEASURED FROM OUTSIDE EDGE OF DEVICE LEAD. DISTANCE TO THE SHUNT COMPONENTS ARE MEASURED FROM THE MIDDLE EDGE OF THE COMPONENT; DISTANCE TO SERIES COMPONENTS MEASURED FROM INSIDE EDGE OF LAND PAD. C2 1.8PF C3 0.1uF C1 1uF SEE LAYOUT FOR RECOMMENDED INDUCTOR TAP POINT C4 0.1uF 5.6 nH Zo=13.6** E=6.2 @5.5GHz Zo=12.4** E=17.3 @5.5GHz Zo=12.4** E=20.0 @5.5GHz Zo=50** E=50.1 @5.5GHz C7 5.6pF RF OUT 1 Bias 6 5 RF IN Zo=50** E=54.5 @5.5GHz C5 4.7 pF Zo=18.1** E=7.7 @5.5GHz Zo=18.1** E=13.2 C6 @5.5GHz 0.7pF Zo=21.8* E=11.6 @5.5GHz 3 SZP-5026 4 VDET R1 750 ohm R3 2.8K ohm R4* 47K ohm VPC Evaluation Board Layout and Bill of Materials 5.15GHz to 5.35GHz Evaluation Board Layout for V+= VCC =VPC =5.0V, IQ =563mA GND V+ R2 C3 C4 L1 C5 C R1 RF IN 125709 SMDI VPC DESG Q1 R1 R2 R3 R4 C1 C2 C3,4 C5 C6 L1 C7 DESCRIPTION SZP-5026Z 750 OHM, 0603 1% 0 OHM, 0603 2.80K OHM, 0603 1% 47K OHM, 0603 1uF 16V MLCC CAP 1.8pF CAP, 0603 0.1uF CAP, 0603 4.7pF CAP, 0603 0.7pF CAP, 0603 5.6nH IND, 0805 5.6pF CAP, 0603 C1 C2 C7 R4 VDET NOTES SOF-26 0402 may be used " " " Tantalum ok for EVM performance. Use MLCC type for best IM3 levels. NPO ROHM MCH185A1R8DK or equiv. NPO, 0402 ok ROHM MCH184CN105K or equiv. NPO, low ESR ATC 600S4R7CW250 or equiv. NPO, low ESR ATC 600S0R7CW250 or equiv. Coilcraft 0805HQ-5N6XJBB NPO, low ESR ATC 600S5R6CW250 or equiv. PCB NOTES: Do not use less than the recommended number of via holes under the device ground paddle. RF Layers thicker than 0.020 inches(0.5mm) not recommended. EDS-105366 Rev C 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 11 of 14 SZP-5026Z Preliminary Evaluation Board Schematic 5.7GHz to 5.9GHz Evaluation Board Schematic for V+=VCC =VPC =5.0V, IQ =602mA V+ www..com R2 0 * R4 SIMULATES EXTERNAL CIRCUIT LOADING TO GROUND. RECOMMENDED LOAD RANGE IS 10K-100K OHMS. MAY BE REMOVED IF VDET IS NOT USED ** TRANSMISSION LINE LENGTHS ARE MEASURED FROM OUTSIDE EDGE OF DEVICE LEAD. DISTANCE TO THE SHUNT COMPONENTS ARE MEASURED FROM THE MIDDLE EDGE OF THE COMPONENT; DISTANCE TO SERIES COMPONENTS MEASURED FROM INSIDE EDGE OF LAND PAD. C2 1.8PF C3 0.1uF C1 1uF SEE LAYOUT FOR RECOMMENDED INDUCTOR TAP POINT C4 0.1uF 5.6 nH 1 Bias 6 5 RF IN C5 4.7 pF Zo=50** E=54 @5.5GHz Zo=18.1** E=7.2 @5.5GHz Zo=18.1** E=11.2 C6 @5.5GHz 0.5pF E=6.4 @5.5GHz Zo=21.8** E=6.7 @5.5GHz Zo=13.2** E=17.5 @5.5GHz Zo=13.2** E=19.9 @5.5GHz Zo=50** E=48.3 @5.5GHz C7 2.4pF RF OUT 3 SZP-5026 4 VDET R1 750 ohm R3 2.8K ohm R4* 47K ohm VPC Evaluation Board Layout and Bill of Materials 5.7GHz to 5.9GHz Evaluation Board Layout for V+= VCC =VPC =5.0V, IQ =602mA GND V+ R2 C3 C4 L1 C5 C6 R3 R1 C7 C2 C1 RF IN 125708 SMDI VPC DESG Q1 R1 R2 R3 R4 C1 C2 C3,4 C5 C6 C7 L1 DESCRIPTION SZP-5026Z 750 OHM, 0603 1% 0 OHM, 0603 2.80K OHM, 0603 1% 47K OHM, 0603 1uF 16V MLCC CAP 1.8pF CAP, 0603 0.1uF CAP, 0603 4.7pF CAP, 0603 0.5pF CAP, 0603 2.4pF CAP, 0603 5.6nH IND, 0805 R4 VDET NOTES SOF-26 0402 may be used " " " Tantalum ok for EVM performance. Use MLCC type for best IM3 levels. NPO ROHM MCH185A1R8DK or equiv. NPO, 0402 ok ROHM MCH184CN105K or equiv. NPO, low ESR ATC 600S4R7CW250 or equiv. NPO, low ESR ATC 600S0R7CW250 or equiv. NPO, low ESR ATC 600S2R4CW250 or equiv. Coilcraft 0805HQ-5N6XJBB PCB NOTES: Do not use less than the recommended number of via holes under the device ground paddle. RF Layers thicker than 0.020 inches(0.5mm) not recommended. 12 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105366 Rev C Preliminary Pin Function 1 VBIAS 2 RF IN 3 VPC www..com 4 5 6 GND VDET RF OUT/VCC NC GND Description This is the supply voltage for the active bias circuit. SZP-5026Z This is the RF input pin and has a DC voltage present. An external DC block is required. Power up/down control pin. The voltage on this pin should never exceed the voltage on pin 3 by more than 0.5V unless the supply current from pin 3 is limited<10mA. This is the output port for the power detector. It samples the power at the input of the amplifier. This is the RF output pin and DC connection to the collector. This pin is not connected internal to the package. Buss it to pin 5 as shown on the app circuit to achieve the specified performance. These pins are DC connected to the backside paddle. They provide good thermal connection to the backside paddle for hand soldering and rework. Many thermal and electrical GND vias are recommended as shown in the landing pattern. Suggested Pad Layout Dimensions in millimeters (inches) 4.57 [0.180] 3.07 [0.121] 0.46 [0.018] 2.64 [0.104] 1.65 [0.065] 0.66 [0.026] 0.43 [0.017] 4.54 [0.179] 1.14 [0.045] Ordering Information Part Number SZP-5026Z SZP-5026Z-EVB1 SZP-5026Z-EVB2 Description Lead-Free, RoHS-Compliant 5.15GHz to 5.35GHz Evaluation Board 5.7GHz to 5.9GHz Evaluation Board Reel Size 7" N/A N/A Devices/Reel 1000 N/A N/A EDS-105366 Rev C 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 13 of 14 SZP-5026Z Preliminary Package Drawing Dimensions in millimeters (inches) Refer to drawing posted at www.rfmd.com for tolerances. www..com Recommended Soldermask Pattern Dimensions in millimeters (inches) 14 of 14 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. EDS-105366 Rev C |
Price & Availability of SZP-5026Z
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |